Shopping Cart

1/4 Inch Poly Micro Tubing

CRS Hydroponics Enterprises


1/4 Inch Poly Micro Tubing

This 1/4" Poly Micro Tube is used to extend from 1/2" or larger mainline to individual plants, pots or 1/4" Drip Line. We sell stakes which will hold the end of the line in place at a plant or to hold the tubing in place on the ground.

  • Dripper or Micro sprinklers may be placed directly into the ends of this tubing
  • All 1/4" fittings will work with this tubing.
  • Poly is more rigid of the two materials used in production of 1/4" micro tube.
  • 1/4" barbed fittings install easier in Poly but we feel the holding power is greater with vinyl.
  • Vinyl will make sharper turns without kinking and shutting off the water flow.


This poly tube is easier to install 1/4" fittings into but will not bend as sharply as Vinyl. If bent too sharp it may kink closing off water flow.

  • Maximum Flow for this tubing is 30 GPH
  • Maximum total line length for this tubing is 30 Ft.
  • You can place dripper directly into the end of this tubing.
  • Any of our fittings designated as 1/4" will work with this tubing

For Hydroponics, Aeroponics,Aquaponics and Soil Irrigation use. 

35.00 per Meter 



Related products
Fittings: Tee, Thread Adapters, and Barbed Elbow (1/4")

Fittings: Tee, Thread Adapters, and B...

CRS Hydroponics Enterprises

₱20.00

White Air Stone

White Air Stone

CRS Hydroponics Enterprises

₱50.00

Air Tube for Air pump

Air Tube for Air pump

CRS Hydroponics Enterprises

₱25.00

Barbed Drip - Elbow and Tee (1/2")

Barbed Drip - Elbow and Tee (1/2")

CRS Hydroponics Enterprises

₱85.00

Grommet 3/4-inch  and Grommet 1/2-inch

Grommet 3/4-inch and Grommet 1/2-inch

CRS Hydroponics Enterprises

From ₱180.00

Top