Shopping Cart

Fittings: Tee, Thread Adapters, and Barbed Elbow (1/4")

CRS Hydroponics Enterprises


Fittings

1/4" Tee - The 1/4" barbed tee is used to connect three ends of 1/4" micro tubing to connect or extend and branch two lines of micro tubing from the drip tubing. By using a barb, the micro tubing is pushed over the barb for a very tight fit. Use for continuing lengths of micro tubing or to extend lines of micro tubing from the poly tubing.

1/4" Barbed Elbow - The 1/4" barbed elbow is used to connect in a 90 degree shape two ends of 1/4" micro tubing to connect or extend a line of micro tubing from the drip tubing. By using a barb, the micro tubing is pushed over the barb for a very tight fit. Use for continuing lengths of micro tubing or to extend a micro tubing from the poly tubing.

1/4" Thread Adapter - The 1/4" barbed adapter is used to connect two ends of 1/4" micro tubing to connect 1/4" micro tubing to 1/4" poly riser or to extend micro tubing from the drip tubing. By using a barb on one side, the micro tubing is pushed over the barb for a very tight fit, with threading the other side. Use for continuing lengths of micro tubing or to extend a poly riser from the poly tubing. 


Related products
1/4 Inch Poly Micro Tubing

1/4 Inch Poly Micro Tubing

CRS Hydroponics Enterprises

₱35.00

White Air Stone

White Air Stone

CRS Hydroponics Enterprises

₱50.00

Air Tube for Air pump

Air Tube for Air pump

CRS Hydroponics Enterprises

₱25.00

Barbed Drip - Elbow and Tee (1/2")

Barbed Drip - Elbow and Tee (1/2")

CRS Hydroponics Enterprises

₱85.00

Grommet 3/4-inch  and Grommet 1/2-inch

Grommet 3/4-inch and Grommet 1/2-inch

CRS Hydroponics Enterprises

From ₱180.00

Top